RiversideTrailer is reader-supported. When you buy via our links, we may earn a commission at no cost to you. Learn more

The Best RV Jack Pads

Every motorhome owner goes through the dilemma of finding the best RV jack pads or RV stabilizer bars for their recreational needs. In my opinion, it is truly overwhelming because there are so many heavy duty jack pads and other RV supplies claiming to be the best.

best rv jack pads

But you don’t have to dig up the internet and find the right jack block or road warrior jack pads for your RV because I have done the researching for you. As an experienced motorhome owner, I have tested all the possible options of pads out there.

So, here I am, presenting you with my top picks of trailer leveling jack that will help keep your RV vehicle stable and make sure your jack does not sink into the surface.

Best RV Jack Pad Reviews

1. Camco 44595 RV Jack Pads

If you own a recreational vehicle, Camco’s best RV stabilizing jack pads are the most important accessories to have. I have been using this Camco RV stabilizing jack pad for a while now, and I must say that it’s quite satisfactory.

I like the fact that these utility blocks are constructed of heavy-duty, UV stabilized polypropylene, which easily supports my 4000-pound travel trailer. Nevertheless, the description says that the RV jack pads can withstand a maximum weight of up to 6000 pounds, which is 3 tons! Since it is made of UV stabilized polypropylene, I can take it to any place hot where the temperature never drops.

You must know that some RV parks and campsites have irregular exteriors that are mostly slopes. In such a situation, it becomes quite risky when you are using the jacks because you cannot properly level your rig. However, the large flat surface of this Camco RV stabilizing jack pad is designed to conform to these uneven surfaces, providing a stable base for your RV jack pad.

Talking about its general features, this trailer jack block comes in a pack of 4, one for each jack pad in your RV. My favorite is the interlocking design of the pads that allow me to stack the pads in a secure way for easy storage.

Furthermore, when it comes to portability, there is a built-in handle for each pad for hassle-free carry. The manufacturer has also included a velcro storage strap to keep the pads tightly in place when they are not in use. I have used these pads for my own stack jacks, swing down stabilizers, fifth wheel stabilizers, and the awning arms.

However, one drawback is that these RV stabilizing jack pads are not compatible with hydraulic jacks. So, if you have an RV vehicle with hydraulic jacks, keep looking for other pad options.
Pros
  • Suitable for travel trailers
  • Comes in a convenient pack of 4 jack pads
  • Large flat surface provides superior stability
  • Interlocking design and the velcro storage strap allows for easy storage
  • Maximum tolerable weight is 6000 pounds
Cons
  • Cannot be used for RV vehicles with hydraulic jacks
Overall, these Camco RV stabilizing jack pads are my favorite RV leveler pads at the moment. These are easy to use, carry, and come in handy when you are parked on an uneven surface.

2. Andersen 3608-M Jack Blocks

Andersen Hitches is a renowned brand in the world of RV vehicles and heavy-duty vehicles. I have been using their trailer jack blocks for my heavy-duty trailer for years, and without a doubt, they are the best. These Andersen Hitches jack pads are quite different from what you would usually see in the market.

To start, these jack blocks come with built-in magnets that prevent the guessing game of where your stabilizer jack pads need to be. In addition, the pads have lipped edges that keep them from slipping off the jack. For me, these two are the core features of the Andersen Hitches RV jack blocks because they provide stability to the trailer when parked on a slope.

Moving on, its cylindrical design is unique. It not only prevents the movement and swaying of the trailer but ensures that your rig remains stress-free. The blocks are 8 inches tall and 10 inches in diameter, which is enough to securely hold a jack of any model. It was interesting for me to find out that you can use these blocks as a water bucket to put out your campfire, as a motorcycle stand, or as a seat.

I appreciate that Andersen Hitches is offering these jack blocks in three variants – packs of 1, 2, and 6. Depending on your needs and trailer model, you can choose 1, 2, or 6 blocks. I stack the block one over another whenever I need extra height. When it comes to cleaning, I only have to do it once a while because they are incredibly resistant to dirt and oil.

Some buyers may find these Andersen Hitches leveling jacks’ prices to be exponentially higher but of course the high-grade material and premium quality comes at a price.
Pros
  • Built-in magnets stick to the jack and stay in place
  • Incorporates a recessed pad area for better leveling
  • Simple cylindrical design is easy to use
  • Multipurpose blocks can be used as a bucket
Cons
  • It is expensive
All I want to say is that you can trust these Andersen Hitches trailer jack blocks for stabilizing your vehicle. There will be less rocking, particularly when people are moving inside a parked trailer!

3. Quality PX1KITE Utility Blocks

If you were looking for good-quality 5th wheel jack pads, then you can end your search right now because I have a special jack pad for you! Quality Plastics introduced a durable, slip-free RV leveling system for RV owners who are struggling to get the most out of their existing jack pads. This utility block is quite different from your traditional blocks because it is made from rubber.

For me, it is a versatile pick for several uses and applications. I use this utility block for my travel trailer leveling jack and fifth wheel truck. Given its sturdy construction and build, I am 100% confident that it will remain fail-proof for other large vehicles as well.

It is made of high-quality, durable rubber that is not only heavy-duty but resistant to external weather conditions. Hence, these rubber jack pads won’t be ruined by harsh elements, rain, cold, and scorching temperatures.

Since it is a quality plastics utility block, the friction/gripping that it delivers is impeccable. The jack remains stable on the block, and the block ensures that it remains stable on the ground. The rubber material gives the block some much-needed flexibility, particularly when used on an uneven surface, preventing the jack from sinking.

What I like the most about this product is their simplistic design. It looks like a large chunk of black rubber, but quite handy. Speaking of design, there is a resilient plastic rope handle attached to the block for easy handling. The block is 11.5 inches in thickness and weighs 14 pounds, so the handle adds to easy portability.

However, one negative aspect of these rubber motorhome jack pads is that the smell of the rubber is intolerable, especially during the first couple of uses. So, I have to store it in my shed and only take it out when I am out with the trailer.
Pros
  • The rubber material is resilient, slip-free, and durable
  • Simple design allows for easy set up
  • Ideal for all kinds of heavy-duty vehicles
  • Excellent gripping prevents sinking
Cons
  • The smell can be annoying
All in all, it is one of the best utility block RV jack pads with a lot of versatility and user-friendliness. You will love it once you start using it.

4. SnapPad RV Leveler Pads

If you are under a budget and looking for decent jack pads that will cater to all your needs, then these RV snap pads are just perfect for you. These pads are ideal for your standard 9-inch round jack foot on numerous leveling systems. I have used these pads a couple of times, and I can promise that they are the ultimate leveling jacks for your motorhome.

What’s interesting about these pads is that they are permanent, meaning you don’t have to go through the hassle of placing them under the jacks every time you park the trailer. I was able to install them within minutes. Simply put, install it once and forget about all your leveling hassles.

The manufacturer designed the pads to provide optimum stability. For starters, the pads have a larger footprint, so it stands unaffected. Also, it uses vibration dampening technology that ensures that pads stick to the ground without sinking. Lastly, the rubber material is flexible enough to conform to uneven surfaces like gravel.

I was amazed to know that these pads are made from recycled tires, which is not only environmentally friendly but comes with excellent anti-slip features. The tire material grips the surface perfectly, eliminating scenarios like popping jacks, slipping on slick exteriors, or high winds.

Since it is made of a combination of tire crumbs and high-strength resin pressed in a 100-ton press, it acts as a great insulator. When I go camping during bad weather, I always install these pads as they can protect me and my electrical appliances during an electrical surge due to a non-direct lightning surge.

However, I would like to warn you about the durability of these pads. They won’t last very long and thus, aren’t meant for regular campers.
Pros
  • Gets installed within minutes
  • Made from recycled tires offering eco-friendliness
  • May prove beneficial as an electrical insulator
  • Offers incredible stability
Cons
  • The pads lack durability
If you have a recreational vehicle that you only use once or twice a month for weekend getaways, then this could be your top pick. Their ease of use will certainly not disappoint you!

5. RoadWarrior RW15 RV Jack Pad

For heavy RVs that require additional support in softer conditions, this ergonomic, heavy-duty jack pad from RoadWarrior is an ideal option. It is one of my top choices in the category for RV leveling pads. These pads are reliable, easy to use, and deliver optimal performance. Without a doubt, they can be deemed the best RV jack pads!

What attracted me to this pad was its ability to support up to 50,000 lbs. While it is a simple-looking pad with no complex design, it easily supported my 45,000 lbs rented trailer. The manufacturer guarantees that the pads are 100% unbreakable. Its incredible strength and durability in comparison with other products in the market can be experienced when heavy RVs are parked on it.

My favorite thing about this jack pad is its equal load distribution. They are engineered for unbeatable strength while keeping the camper safe and level. It will support your RV from sinking into soft ground, and its cushiony texture prevents the jack from damaging paved exteriors.

The best part is that the pads are available in three size variants, including 12 inches, 15 inches, and 18 inches. Based on your vehicle model and jack design, you can choose your preferred size.

To make it easy for users, the manufacturer also included their patented TuffGrip handles that are ergonomic, unbreakable, and waterproof. The inclusion of the handle makes placing the camper RV jack pads a hassle-free task.

On the downside, however, the jack pad comes as a set of one. If you want more, say 4, then you will have to purchase them separately.
Pros
  • Patented TuffGrip handles are unbreakable and waterproof
  • The design boasts equal load distribution
  • Can support up to 50,000 lbs
  • Available in three size variants
Cons
  • Each pad is sold separately
This is a great deal for a jack pad with heavy-duty functionalities. If you are looking for a RV jack pad serving long-term purposes, I would recommend this!

6. Homeon AC-902 RV Jack Pads

The next on my list is a budget jack pad from Homeon Wheels. If you are under a budget and looking for a decent jack stabilizer, then this is it. I have used it a couple of times, and I must say that the pads exceeded my expectations.

It was good to know that the jack pads are compatible with jacks, swing down stabilizers, and fifth wheel stabilizers. The pads had no problem keeping my jacks from sinking or cracking into soft ground. Its unique, reinforced honeycomb structure gives the pad an additional strength to maintain stability.

On the bottom layer, you will find a flat surface that has four non-slip pads installed on four corners. This especially came in handy when I parked my RV on a muddy surface. The non-slip pads and the flat surface tightly grips the ground to provide stability to the jacks. As per the manufacturer, you can use these pads with Homeon Plastic Stabilizer Jack Stands for better effect.

Each jack pad weighs a little over 3 pounds, which I think is quite a commendable job from the manufacturer because the lightweightedness allows me to carry the pads with ease. My favorite part about its design is the integrated handle that can be used for carrying the pads.

Last but not least, the pads are made of polypropylene, which is weatherproof material, resistant to UV, and highly durable. I can say that these pads will last for years to come.

But one of the flaws with such pads is that they cannot be used for hydraulic jacks, which is a big drawback.
Pros
  • Polypropylene material is weatherproof and UV resistant
  • Portable design comes with an integrated handle
  • Four anti-slip mats attached to the surface for superior stability
  • Honeycomb design prevents the jack from sinking
Cons
  • Not suitable for hydraulic jacks
For me, it is apad high quality product that’s not only affordable but also efficient in terms of design and functionality. So, if you have a budget issue or do not want to spend more on a RV jack pad, you can opt for this model.

7. Leisure Time Marketing Inc. HP1214 Hush Pad

When it comes to larger motorhomes, plastic jack pads aren’t that reliable and are prone to breakage. So, it would be intelligent if you invest in a quality RV pad. One such high-quality product is this Hush Pad from Leisure Time Marketing Inc. This is a heavy-duty jack pad, which is one of my favorites because of the features that it offers.

To start with, this pad is made from a combination of recycled tires and high-strength resin. The mixture is pressed under a hydraulic press, and the resultant is a large, heavy rubber jack pad. Believe it or not, this jack pad supported one of my largest motorhomes that weigh a little over 45,000 lbs. The manufacturer itself recommended a maximum weight of 50,000 lbs.

The material is hard wearing and durable. I tried using it in the harsh weather conditions with heavy rains, and the pads turned out to be okay. It is mold and moisture resistant as well, so you can expect the pads to serve you for decades.

My favorite thing about this jack pad is its anti-vibration feature. I parked my motorhome on a gravel surface and was inside the motorhome with my family, playing around. To my surprise, the jack didn’t move an inch or cracked even a little. The rubbery composition of the pad absorbs all the stress or pressure that is placed on it, keeping the jack stable.

But it is a bummer that the jack pad comes in a pack of 1. You have to purchase more separately. Since a single pad weighs 10 pounds, carrying 4-5 Hush Pads can be a little tedious.
Pros
  • Made from recycled tires for sustainability
  • Offers great strength and durability in tough conditions
  • The pad is resistant to moisture and mold, offering a longer lifespan
  • Its anti-vibration feature keeps the jack stable
Cons
  • The packs contains a single pad, have to buy the rest separately
If you own a large motorhome, then this pad will fulfill all your leveling needs. Although the pad is a little heavy, it is a boon for heavy-weight vehicles.

8. Andersen Hitches 3621 EZ-Block

Andersen Hitches is a family-owned business popular for their homemade RV stabilizer pads. Their EZ Block for RV jacks is quite popular among bumper-tow trailer owners. This is because these blocks feature a vastly durable design that is compatible to work with scissor jacks, pad jacks, and post jacks, among others.

I have used the EZ-Block for my tow trailer several times. It is quite a handy jack pad that gives your trailer a nice lift and stability. A single block can support up to 2000 lbs, which is decent, given its features. The best part is that these blocks are stackable, and I often stack one block over the other if I need extra height.

Unlike the other jack pads that we discussed above, the EZ-Block has a unique, tall design. Its height is what makes it different from others. The block is 8 inches tall, and when you double-stack it, the height reaches 14 inches. Moreover, there are dedicated finger holes provided on each side of the block for easy moving.

I was impressed by the fact that this jack pad is composed of materials that resist oil, grime, and dirt. This ensures that the block maintains its original shape and integrity regardless of the environment that it is in.

The most handy feature of EZ-Block is the recessed post hole that prevents the jacks from slipping. Overall, I didn’t find any problems with its set up and use.

While it comes with a lifetime warranty, I think the plastic material used for its construction may degrade over time with constant usage.
Pros
  • Suitable for scissor jacks, pad jacks, and post jacks
  • Each block can support 2000 lbs
  • There are finger holes for easy handling of the block
  • The recessed post hole prevents the jack from slipping or cracking
Cons
  • The plastic material may wear off over time
It is a homemade RV jack pad from a reputable brand. So, I trust these blocks with many things. If you don’t want to research further before you purchase a jack pad, you can always go with the EZ-Block.

9. SnapPad HiWay RV Jack Pad

The SnapPad HiWay Permanent RV Leveling Jack Pad can make your life much easier with its different features and functionalities. As the name suggests, this is a permanent RV jack pad that attaches to the jack.

I installed these pads on my RV jack within minutes. All you have to do is position the pads appropriately underneath the jacks, slowly bring the jacks down, and wait until it perfectly fits the pads. What this means is that you don’t have to crawl under your rig to install the pads.

The pads are available in three size variants, including 8, 10, and 11.5 inches. While HiWay fits HWH round metal feet on Winnebago, Newmar, and Tiffin, verify with the manufacturer of the jacks before making a purchase. This is because sometimes different sizes are needed for the same rig.

The HiWay pads offer great stability by contouring to uneven surfaces like gravel, providing more vibration dampening and offering a large footprint. Since it is made of recycled tires, the jack pad is environmentally-friendly.

The pads are a combination of high-strength resin, tire crumbs, pressed in a 100+ ton press, adding to its durability. This composition ensures that the pads are UV resistant and aren’t affected by mud, tar, oil, heat, water, and other environmental hazards.

My favorite is the anti-slip feature. The rubber texture on the pads offers superior grip, preventing slipping of jacks even with the slightest movements or popping of jacks on slick exteriors or in high winds.

However, choosing the right size can be a little daunting. It may not support the majority of RV jacks out there. I recommend that you measure the front and back jacks of your RV before making a purchase.
Pros
  • Works as permanent padding for your RV jack
  • Offers incredible stability with vibration dampening
  • Is environmentally friendly
  • The composition is highly durable with UV resistance
Cons
  • Choosing the right size can be daunting
HiWay is one of the best jack pads available in today’s market. Given its great features, it is certainly worth the purchase.

10. Camco 44600 Flex Pads

Camco is one of my favorite brands when it comes to jack pads. This model, in particular, is designed with small motorhome owners in mind. If you have been looking for a Camco pad for your small-to-medium-sized trailer or RV, I suggest that you give this Camco Universal Flex Pads a try.

I really liked its design. The perfect 8.5-inch square with 1-inch thickness allows for a hassle-free set up and use. All you have to do is place the leveling blocks correctly on the ground underneath where the jacks are located and simply pull down the jacks. Since this Camco 44600 universal flex is lightweight, storing and carrying it wherever you go is easy.

The Camco pads are constructed of recycled materials that are not only flexible but also durable. Tire crumbs are the primary material that gives the pad its strength. Since it is flat from below, I was able to place the pads on uneven surfaces like rough earth, tree roots, and gravel.

Thanks to its flexibility, this universal flex jack pad conforms to the surface that it is placed on. There are recessed markings on the top surface of the Camco pads that are deliberately there to provide extra gripping to the jack.

The best part about these Camco jack pads is that they are weather-resistant. It was a significant relief for me because where I live, mold and mildew are common. Also, this one is UV resistant. So, it won’t expand or contract in heavy heat. It was interesting to know that the manufacturer advises using these Camco pads under other leveling blocks for heavy-duty RVs to prevent cracking.

But one thing that bugs me about this Camco RV stabilizing jack pad is that there are no size variants. Some jack support may not be compatible with these Camco pads.
Pros
  • Simplistic design allows for hassle-free use
  • The use of recycled materials give flexibility
  • The pads are UV resistant and weatherproof
  • Can be used under other pads to prevent cracking
Cons
  • Only a single size option is available
Overall, this Camco RV universal flex jack pad works well. If you are not a regular camper and own a small trailer, these are the quality plastics utility pads to have. You won’t be disappointed!

11. Bigfoot P121210 Jack Pads

Bigfoot jack pads are quite unique in terms of design and composition. They are made from custom composite plastic that is rigid and provides quality plastics utility. I bought these for my trailer truck a couple of years ago and have used them quite vigilantly. To my surprise, they still look new and probably will continue to cater to my leveling needs for years to come.

They come in a pack of 4, so you don’t have to buy extra pads separately unless required. I totally dig its design. The stabilizer jack pad is a perfect 12-inch square block with 1-inch thickness. They are easy to stack for hassle-free storage.

The best part is that the blocks are composed to support a maximum weight of 45,000 pounds, which is quite impressive for a decent-looking jack pad. What this means is you can use these pads for your fifth wheel. This stabilizer jack pad has excellent weight tolerance power.

They are so much better in terms of portability because they come with plastic rope handles. The ropes are unbreakable and ergonomic. I also like the fact that the rope handles on this stabilizer jack pad possess the right thickness, making them easy to grab.

The blocks are designed to prevent the jacks from sinking into the ground, particularly on uneven surfaces like gravel. Thanks to its flat surface, the RV stabilizer jack pads remain stable.

However, I realized that these RV stabilizer jack pads are so rigid that sometimes they struggle to stay on the surface when the jack is on.
Pros
  • Made from custom composite plastic for durability
  • Each block comes with an ergonomic rope handle
  • Square design makes it easy to store and stack
  • Comes in a pack of 4 blocks
Cons
  • Fails to provide flexibility as a stabilizer jack pad
The blocks are good enough to take care of your leveling needs when you are out camping. You should go for this one if you are confused with all the types of stabilizer jack pads thrown at you.

12. Valterra A10-0918 Leveler Pads

For those looking for a multipurpose jack pad at a reasonable price, Valterra could be a good option. It is offering a pack of 10 stackable leveling blocks that serves three different purposes – provides tongue wheel support, works as jack pads, and as RV leveler pads.

These trailer jack pads resemble lego blocks. I stack them over one another to take care of my leveling needs. I appreciate the makers for their innovative design. Each jack block comes with an easy grip handle that provides proper grip when holding and acts as a transition to attach the next block. Its interlocking mechanism also allows me to create a smooth ramp for when the tires of the RV trailer get stuck.

Since the pads have a maximum weight capacity of 4000 pounds, you can use them for your medium-sized motorhome with ease and prevent against any sinking into ground.

The pads are made of high-impact polyethylene plastic that gives them rigidity and durability. The plastic remains unaffected from rain and heat. Also, it has a smooth surface, so things like mold and dirt won’t stick around. After every use, I run the RV jack block under water to clean. When I talk about storing, you can stack them and then bind the pads with a velcro storage strap that the manufacturer has included.

However, one of my biggest concerns when using this RV jack block is small pebbles getting in between the gaps and splitting the block if high pressure is applied.
Pros
  • It is a high quality multi-use RV jack pad for campers
  • Serves as a good trailer jack
  • The pack contains 10 rigid pads
  • Has an interlocking design for improved stackability
  • Comes with a comfortable grip handle
Cons
  • Pebbles can get stuck in between the gaps
If you do not intend to take your RV trailer out every weekend and only prefer a once-in-a-while getaway, then you should definitely check out these RV jack pads. These ones are incredible for occasional uses!

13. Swess Large RV Jack Pads

When looking for RV jack pads or RV leveler pads, you need a RV jack block that is versatile enough to be used on stabilizing jacks and hydraulic levelers. Swess Large RV Jack Pads are among the most useful and versatile jack pads included on this list of RV supplies. It is a pack of two jack blocks, and I have been using these RV with levelers and stabilizing systems such as RV stabilizing pads.

These pads are designed with a reinforced honeycomb structure that prevents stabilizers and jacks from sinking into soft ground. I use these RV jack pads and leveling blocks to prevent cracking. That is, it can greatly support your existing RV jack pad, offering great stability.

One of the things I like about this trailer jack block is that it comes with a built-in handle, which allows me to easily transport and carry it around. The handle is quite functional because you can use it to adjust the block during setup. Most importantly, these handles enable quick and easy storage.

The primary reason why I included these pads in my list is that they are strong and durable. They are made of composite materials, which are sturdy and rigid. These levelers are definitely made to last for years to come. Ease of use is another reason why I highly recommend it for campers. To use, place the trailer jack block on the surface with the flat side down. They will help prevent your RV vehicle from sinking into the ground.

However, I found that the RV jack pads cannot tolerate high pressure and weight. It might break under heavy pressure.
Pros
  • Honeycomb structure offers great stability and grip
  • The pads are perfect for hydraulic levelers and stabilizing jacks
  • Comes with an easy grip handle
  • Can protect the jacks from sinking into the ground
Cons
  • Can break under heavy pressure
All in all, you can rely on these RV leveler pads. I recommend you to use it with other RV jack blocks and RV supplies for additional leveling and stability.

14. Technoflex HP0608 Hush Pad II

The last on my top-rated RV jack pad and RV supplies list is a universal fit jack pad from Technoflux. What this means is that the pad is compatible with the majority of RV jack sizes and designs. It is made of recycled tires and high-strength resin.

One of the aspects that attracted me to this RV jack pad was its anti-vibration feature. Since its major composition is rubber, the pad has an absorption quality that diminishes any vibration and movement experienced by the jack pole. Thus, it keeps the jack perfectly stable, even on rugged surfaces.

Its rubbery texture allows the pad to conform to the surface, preventing the jack from sinking into the ground. The leveling system comes in a pack of 4, so you don’t have to buy anything separately unless needed.

Above all, these RV stabilizer jacks are hard-wearing and durable. While they can easily support heavy pressure, they are also resistant to mold and moisture, which is useful because mold and moisture can degrade the quality of the jack blocks. Also, the manufacturer is offering a 5-year warranty on these RV jack pads, which establishes the fact that they are a high-quality product.

On the negative side, the RV jack pads are quite heavy. Even though they have handles, adjusting the position of the stabilizer jack pad can be a little daunting because of their weight.
Pros
  • The pads come with anti-vibration features to keep the jack stable
  • The heavy duty materials used are mold and moisture resistant
  • Comes in a pack of 4
  • The stabilizer jack pad is a universal fit, convenient for all RV owners
Cons
  • The stabilizer jack pad is slightly heavy
I would say that if you are looking for an eco-friendly option, these RV stabilizer pads fit the match and prevent your vehicle from sinking into the ground. Also, these RV leveling blocks are incredibly durable, backed by a 5-year manufacturing warranty.

What To Know Before To Buy The Best RV Jack Pads

utility-blocks

Choosing the right RV jack stabilizers will come down to many factors. As you can already see, the market is filled with a wide selection of jack pads. My advice for you is to understand everything you need to know about RV jack pads so that you can make an informed decision.

So, I have prepared this section, where I am going to discuss several factors at length to ensure that you are aware of what you should actually be looking for when purchasing RV jack blocks.

Different types of jack pads:

There are several different types of RV jack stabilizers available on the market. Most RV jack blocks are manufactured from heavy duty materials, plastic or rubber.

  • Permanent Jack Pads – While the majority of jack pads are designed to be used when required, you can get permanent jack blocks that you only have to install once, and it will always stay on your motorhome.
  • Plastic Jack Pads – These are the most common types of pads available. Some manufacturers claim that their plastic pads are unbreakable, but it is important to find a quality jack pad. The problem with cheaper RV jack pads of plastic materials is that they tend to shatter or crack if the weight is too heavy.
  • Rubber Jack Pads – Pads made of rubber materials are highly popular among RV vehicle owners because of their versatility and ease of use. Rubber can withstand some serious weight and absorb vibration. Some manufacturers have also started producing jack blocks using recycled tires that offer great rigidity.

Benefits and drawbacks of jack pads:

The following are some of the advantages and disadvantages of jack pads:

Advantages

  • Provides stability and support to the RV vehicle and RV jacks when parked on an uneven surface
  • Weather-proof and UV stabilized
  • Won’t break or crack easily
  • Easy to install and remove
  • Made of heavy-duty materials

Disadvantages

  • Can be expensive
  • Finding the right size can be a little daunting
  • Only some trusted brands out there

Durability

Many jack pads made of heavy duty materials are designed to support hundreds and even thousands of pounds. But its ultimate strength is of no use if the pads start cracking or breaking after the first couple of uses. It is not just the weight but also the environmental factors that may affect the durability of the leveling jack pad. Factors like heavy rains and the scorching heat of the sun may degrade the quality of your RV jack pads. So, make sure you opt for the models that are weatherproof and offer protection against UV radiation.

Measurements

This is presumably the most important factor to consider when buying RV jack pads. If the RV pads can’t fit your jacks properly, then it won’t provide stability as promised. I go by the thumb rule of – the wider these pads are, the better their quality. An RV jack pad should be wide enough to cover a large surface area, offering a sense of stability. So, you should try to find RV jack pads that are compatible with your motorhome and choose the largest size that doesn’t exceed your budget.

Load Capacity

Manufacturers provide their RV jack pads with a load capacity rating that tells how much weight the pad can bear. If you go with top-tier jack pads, they usually have a load capacity rating of 50,000 pounds. So, make sure you choose the RV jack pad that has an appropriate load capacity.

How Do RV Jack Pads Work

RV jack pads are designed to help distribute the load of the RV jack safely, providing a level and strong foundation. The majority of the jacks blocks are heavy-duty and possess industrial strength to last longer.

A jack pad prevents the jacks from cracking or sinking into soft ground. Thus, it takes care of your leveling system and foundation needs, ensuring the safety of your RV vehicle and the people inside it.

Some pads are flat and come with an interlocking design, making them stackable to be used under the RV jack. On the other hand, a few leveling jack pads are just large chunks of rubber or plastic that are designed to withstand heavy pressure and stress.

The best RV jack pads are designed to prevent water/moisture absorption and remain unaffected from splinters and cracks.

Who Makes The Best Jack Pads For RV

motorhome-jack-pads

There are numerous manufacturers out there advertising their products to be the best. However, that is far away from reality. Different manufacturers use different designs and compositions to make RV jack pads. Based on my experience, I think there are some brands that may live up to your expectations. They are:

  • Camco
  • Andersen Hitches
  • Quality Plastics
  • SnapPad
  • RoadWarrior
  • Homeon Wheels
  • Leisure Time Marketing Inc. Technoflex
  • Bigfoot
  • Valterra
  • Swess

How Do You Set Up And Use An RV Jack Pad

The setup for most of the RV jack pads are quite simple and shouldn’t take much of your time or effort. All you have to do is put these stabilizer pads or stacker blocks under the jack and let them provide stability to your RV.

Now, there are some models that work as a permanent fixture. Once you install them, you don’t have to bother about reinstalling them. Nevertheless, I advise that you read the instructions provided by the manufacturer before you begin the setup and installation.

How Can I Make My Travel Trailer More Stable

Leveling pads for campers made of rubber materials are specially designed to keep the vehicle or travel trailer stable when parked on uneven terrains. You should invest in a good-quality jack pad if you want to prevent the jack poles from going down into the ground.

What Do You Put Under RV Jacks

You put RV pads under the jacks to give stability to your entire motorhome. These pads are made of different materials like rubber and plastic. They are designed to keep the jack poles stable.

Conclusion

I hope that finding the best RV jack pads for your needs should be easy by now. The jack pads that I have mentioned are already the best purchases, but you are free to do your own research. Take your time and read the product specifications carefully before making a purchase.

Leave a Comment